8 files changed, 141 insertions, 0 deletions
diff --git a/.config/vis/colors/basic_colors b/.config/vis/colors/basic_colors
new file mode 100644
index 0000000..4be5fa4
--- /dev/null
+++ b/.config/vis/colors/basic_colors
@@ -0,0 +1,15 @@
+4
+12
+6
+14
+2
+10
+11
+3
+5
+1
+13
+9
+7
+15
+0
diff --git a/.config/vis/colors/blue b/.config/vis/colors/blue
new file mode 100644
index 0000000..24560d9
--- /dev/null
+++ b/.config/vis/colors/blue
@@ -0,0 +1 @@
+blue
diff --git a/.config/vis/colors/cyan b/.config/vis/colors/cyan
new file mode 100644
index 0000000..3b15042
--- /dev/null
+++ b/.config/vis/colors/cyan
@@ -0,0 +1 @@
+cyan
diff --git a/.config/vis/colors/green b/.config/vis/colors/green
new file mode 100644
index 0000000..a5b73ed
--- /dev/null
+++ b/.config/vis/colors/green
@@ -0,0 +1 @@
+green
diff --git a/.config/vis/colors/lightblue b/.config/vis/colors/lightblue
new file mode 100644
index 0000000..ea90ee3
--- /dev/null
+++ b/.config/vis/colors/lightblue
@@ -0,0 +1 @@
+45
diff --git a/.config/vis/colors/rainbow b/.config/vis/colors/rainbow
new file mode 100644
index 0000000..13714c5
--- /dev/null
+++ b/.config/vis/colors/rainbow
@@ -0,0 +1,30 @@
+#1F80F3
+#08ADD8
+#06B3D4
+#01D7AF
+#01DBA9
+#0DF47E
+#26FE53
+#2CFF4B
+#4FF829
+#58F522
+#83DE0B
+#8FD506
+#ADBB01
+#BEAA01
+#D78C07
+#E27C0D
+#F65525
+#F94C2B
+#FE2A4D
+#FE2456
+#F20B81
+#D901AC
+#D501B2
+#B007D6
+#AA09DA
+#7C21F4
+#6D2DF9
+#5541FE
+#3E58FE
+#2A70F9
diff --git a/.config/vis/config b/.config/vis/config
new file mode 100644
index 0000000..85c99fa
--- /dev/null
+++ b/.config/vis/config
@@ -0,0 +1,91 @@
+##Refresh rate of the visualizers. A really high refresh rate may cause screen tearing. Default is 20.
+#visualizer.fps=20
+
+##Sets the audio sources to use. Currently available ones are "mpd" and "alsa"Sets the audio sources to use.
+##Currently available ones are "mpd", "pulse" and "alsa". Defaults to "mpd".
+#audio.sources=pulse
+
+##vis tries to find the correct pulseaudio sink, however this will not work on all systems.
+##If pulse audio is not working with vis try switching the audio source. A list can be found by running the
+##command pacmd list-sinks  | grep -e 'name:'  -e 'index'
+#audio.pulse.source=0
+
+##Defaults to "/tmp/mpd.fifo"
+#mpd.fifo.path=/tmp/mpd.fifo
+
+##If set to false the visualizers will use mono mode instead of stereo. Some visualizers will
+##behave differently when mono is enabled. For example, spectrum show two sets of bars.
+#audio.stereo.enabled=false
+
+##Specifies how often the visualizer will change in seconds. 0 means do not rotate. Default is 0.
+#visualizer.rotation.secs=10
+
+##Configures the samples rate and the cutoff frequencies.
+#audio.sampling.frequency=44100
+#audio.low.cutoff.frequency=22050
+#audio.high.cutoff.frequency=30
+
+##Applies scaling factor to both lorenz and ellipse visualizers. This is useful when the system audio is set
+#to a low volume.
+#visualizer.scaling.multiplier=1.0
+
+##Configures the visualizers and the order they are in. Available visualizers are spectrum,lorenz,ellipse.
+##Defaults to spectrum,ellipse,lorenz
+#visualizers=spectrum,ellipse,lorenz
+
+
+##Configures what character the spectrum visualizer will use. Specifying a space (e.g " ") means the
+##background will be colored instead of the character. Defaults to " ".
+#visualizer.spectrum.character=🌊
+
+##Spectrum bar width. Defaults to 2.
+visualizer.spectrum.bar.width=2
+
+##The amount of space between each bar in the spectrum visualizer. Defaults to 1. It's possible to set this to
+##zero to have no space between bars
+visualizer.spectrum.bar.spacing=1
+
+##Available smoothing options are monstercat, sgs, none.
+#visualizer.spectrum.smoothing.mode=sgs
+
+##This configures the falloff effect on the spectrum visualizer. Available falloff options are fill,top,none.
+##Defaults to "fill"
+#visualizer.spectrum.falloff.mode=fill
+
+##Configures how fast the falloff character falls. This is an exponential falloff so values usually look
+##best 0.9+ and small changes in this value can have a large effect. Defaults to 0.95
+#visualizer.spectrum.falloff.weight=0.95
+
+##Margins in percent of total screen for spectrum visualizer. All margins default to 0
+#visualizer.spectrum.top.margin=0.30
+#visualizer.spectrum.bottom.margin=0.10
+#visualizer.spectrum.right.margin=0.10
+#visualizer.spectrum.left.margin=0.10
+
+##Reverses the direction of the spectrum so that high freqs are first and low freqs last. Defaults to false.
+#visualizer.spectrum.reversed=false
+
+##This configures the sgs smoothing effect on the spectrum visualizer. More points spreads out the smoothing
+##effect and increasing passes runs the smoother multiple times on reach run. Defaults are points=3 and passes=1
+#visualizer.sgs.smoothing.points=3
+#visualizer.sgs.smoothing.passes=1
+
+
+##Configures what character the ellipse visualizer will use. Specifying a space (e.g " ") means the
+##background will be colored instead of the character. Defaults to "█".
+#visualizer.ellipse.character=#
+
+##The radius of each color ring in the ellipse visualizer. Defaults to 2.
+#visualizer.ellipse.radius=2
+
+
+##Configures what character the lorenz visualizer will use. Specifying a space (e.g " ") means the
+##background will be colored instead of the character. Defaults to "█".
+#visualizer.lorenz.character=#
+
+
+##Turns off overriding the user's terminal colors. This is true by default.
+colors.override.terminal=false
+
+##Specifies the color scheme. The color scheme must be in ~/.config/vis/colors/ directory. The default scheme is "colors".
+colors.scheme=lightblue,basic_colors,cyan,blue,greene
diff --git a/.config/vis/vis.log b/.config/vis/vis.log
new file mode 100644
index 0000000..f18a4dc
--- /dev/null
+++ b/.config/vis/vis.log
@@ -0,0 +1 @@
+Received signal: 15