initial commit

10 files changed, 2020 insertions, 0 deletions

diff --git a/.config/compton.conf b/.config/compton.conf
new file mode 100644
index 0000000..6608cb2
--- /dev/null
+++ b/.config/compton.conf
@@ -0,0 +1,233 @@
+# Thank you code_nomad: http://9m.no/ꪯ鵞

+

+#################################

+#

+# Backend

+#

+#################################

+

+# Backend to use: "xrender" or "glx".

+# GLX backend is typically much faster but depends on a sane driver.

+backend = "glx";

+

+#################################

+#

+# GLX backend

+#

+#################################

+

+glx-no-stencil = true;

+

+# GLX backend: Copy unmodified regions from front buffer instead of redrawing them all.

+# My tests with nvidia-drivers show a 10% decrease in performance when the whole screen is modified,

+# but a 20% increase when only 1/4 is.

+# My tests on nouveau show terrible slowdown.

+# Useful with --glx-swap-method, as well.

+glx-copy-from-front = false;

+

+# GLX backend: Use MESA_copy_sub_buffer to do partial screen update.

+# My tests on nouveau shows a 200% performance boost when only 1/4 of the screen is updated.

+# May break VSync and is not available on some drivers.

+# Overrides --glx-copy-from-front.

+# glx-use-copysubbuffermesa = true;

+

+# GLX backend: Avoid rebinding pixmap on window damage.

+# Probably could improve performance on rapid window content changes, but is known to break things on some drivers (LLVMpipe).

+# Recommended if it works.

+# glx-no-rebind-pixmap = true;

+

+

+# GLX backend: GLX buffer swap method we assume.

+# Could be undefined (0), copy (1), exchange (2), 3-6, or buffer-age (-1).

+# undefined is the slowest and the safest, and the default value.

+# copy is fastest, but may fail on some drivers,

+# 2-6 are gradually slower but safer (6 is still faster than 0).

+# Usually, double buffer means 2, triple buffer means 3.

+# buffer-age means auto-detect using GLX_EXT_buffer_age, supported by some drivers.

+# Useless with --glx-use-copysubbuffermesa.

+# Partially breaks --resize-damage.

+# Defaults to undefined.

+glx-swap-method = "undefined";

+

+#################################

+#

+# Shadows

+#

+#################################

+

+# Enabled client-side shadows on windows.

+shadow = true;

+# Don't draw shadows on DND windows.

+no-dnd-shadow = true;

+# Avoid drawing shadows on dock/panel windows.

+no-dock-shadow = true;

+# Zero the part of the shadow's mask behind the window. Fix some weirdness with ARGB windows.

+clear-shadow = true;

+# The blur radius for shadows. (default 12)

+shadow-radius = 5;

+# The left offset for shadows. (default -15)

+shadow-offset-x = -5;

+# The top offset for shadows. (default -15)

+shadow-offset-y = -5;

+# The translucency for shadows. (default .75)

+shadow-opacity = 0.5;

+

+# Set if you want different colour shadows

+# shadow-red = 0.0;

+# shadow-green = 0.0;

+# shadow-blue = 0.0;

+

+# The shadow exclude options are helpful if you have shadows enabled. Due to the way compton draws its shadows, certain applications will have visual glitches

+# (most applications are fine, only apps that do weird things with xshapes or argb are affected).

+# This list includes all the affected apps I found in my testing. The "! name~=''" part excludes shadows on any "Unknown" windows, this prevents a visual glitch with the XFWM alt tab switcher.

+shadow-exclude = [

+    "! name~=''",

+    "name = 'Notification'",

+    "name = 'Plank'",

+    "name = 'Docky'",

+    "name = 'Kupfer'",

+    "name = 'xfce4-notifyd'",

+    "name *= 'VLC'",

+    "name *= 'compton'",

+    "name *= 'Chromium'",

+    "name *= 'Chrome'",

+    "class_g = 'Conky'",

+    "class_g = 'Kupfer'",

+    "class_g = 'Synapse'",

+    "class_g ?= 'Notify-osd'",

+    "class_g ?= 'Cairo-dock'",

+    "class_g ?= 'Xfce4-notifyd'",

+    "class_g ?= 'Xfce4-power-manager'",

+    "_GTK_FRAME_EXTENTS@:c"

+];

+# Avoid drawing shadow on all shaped windows (see also: --detect-rounded-corners)

+shadow-ignore-shaped = false;

+

+#################################

+#

+# Opacity

+#

+#################################

+

+menu-opacity = 1;

+inactive-opacity = 1;

+active-opacity = 1;

+frame-opacity = 1;

+inactive-opacity-override = false;

+alpha-step = 0.06;

+

+# Dim inactive windows. (0.0 - 1.0)

+inactive-dim = 0.2;

+# Do not let dimness adjust based on window opacity.

+# inactive-dim-fixed = true;

+# Blur background of transparent windows. Bad performance with X Render backend. GLX backend is preferred.

+# blur-background = true;

+# Blur background of opaque windows with transparent frames as well.

+# blur-background-frame = true;

+# Do not let blur radius adjust based on window opacity.

+blur-background-fixed = false;

+blur-background-exclude = [

+    "window_type = 'dock'",

+    "window_type = 'desktop'"

+];

+

+#################################

+#

+# Fading

+#

+#################################

+

+# Fade windows during opacity changes.

+fading = true;

+# The time between steps in a fade in milliseconds. (default 10).

+fade-delta = 4;

+# Opacity change between steps while fading in. (default 0.028).

+fade-in-step = 0.03;

+# Opacity change between steps while fading out. (default 0.03).

+fade-out-step = 0.03;

+# Fade windows in/out when opening/closing

+# no-fading-openclose = true;

+

+# Specify a list of conditions of windows that should not be faded.

+fade-exclude = [ ];

+

+#################################

+#

+# Other

+#

+#################################

+

+# Try to detect WM windows and mark them as active.

+mark-wmwin-focused = true;

+# Mark all non-WM but override-redirect windows active (e.g. menus).

+mark-ovredir-focused = true;

+# Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused instead of using FocusIn/Out events.

+# Usually more reliable but depends on a EWMH-compliant WM.

+use-ewmh-active-win = true;

+# Detect rounded corners and treat them as rectangular when --shadow-ignore-shaped is on.

+detect-rounded-corners = true;

+

+# Detect _NET_WM_OPACITY on client windows, useful for window managers not passing _NET_WM_OPACITY of client windows to frame windows.

+# This prevents opacity being ignored for some apps.

+# For example without this enabled my xfce4-notifyd is 100% opacity no matter what.

+detect-client-opacity = true;

+

+# Specify refresh rate of the screen.

+# If not specified or 0, compton will try detecting this with X RandR extension.

+refresh-rate = 0;

+

+# Set VSync method. VSync methods currently available:

+# none: No VSync

+# drm: VSync with DRM_IOCTL_WAIT_VBLANK. May only work on some drivers.

+# opengl: Try to VSync with SGI_video_sync OpenGL extension. Only work on some drivers.

+# opengl-oml: Try to VSync with OML_sync_control OpenGL extension. Only work on some drivers.

+# opengl-swc: Try to VSync with SGI_swap_control OpenGL extension. Only work on some drivers. Works only with GLX backend. Known to be most effective on many drivers. Does not actually control paint timing, only buffer swap is affected, so it doesn’t have the effect of --sw-opti unlike other methods. Experimental.

+# opengl-mswc: Try to VSync with MESA_swap_control OpenGL extension. Basically the same as opengl-swc above, except the extension we use.

+# (Note some VSync methods may not be enabled at compile time.)

+vsync = "opengl-swc";

+

+# Enable DBE painting mode, intended to use with VSync to (hopefully) eliminate tearing.

+# Reported to have no effect, though.

+dbe = false;

+# Painting on X Composite overlay window. Recommended.

+paint-on-overlay = true;

+

+# Limit compton to repaint at most once every 1 / refresh_rate second to boost performance.

+# This should not be used with --vsync drm/opengl/opengl-oml as they essentially does --sw-opti's job already,

+# unless you wish to specify a lower refresh rate than the actual value.

+sw-opti = true;

+

+# Unredirect all windows if a full-screen opaque window is detected, to maximize performance for full-screen windows, like games.

+# Known to cause flickering when redirecting/unredirecting windows.

+# paint-on-overlay may make the flickering less obvious.

+unredir-if-possible = true;

+

+# Specify a list of conditions of windows that should always be considered focused.

+focus-exclude = [ ];

+

+# Use WM_TRANSIENT_FOR to group windows, and consider windows in the same group focused at the same time.

+detect-transient = true;

+# Use WM_CLIENT_LEADER to group windows, and consider windows in the same group focused at the same time.

+# WM_TRANSIENT_FOR has higher priority if --detect-transient is enabled, too.

+detect-client-leader = true;

+

+#################################

+#

+# Window type settings

+#

+#################################

+

+wintypes:

+{

+    tooltip =

+    {

+        # fade: Fade the particular type of windows.

+        fade = true;

+        # shadow: Give those windows shadow

+        shadow = false;

+        # opacity: Default opacity for the type of windows.

+        opacity = 0.85;

+        # focus: Whether to always consider windows of this type focused.

+        focus = true;

+    };

+};

diff --git a/.config/i3/config b/.config/i3/config
new file mode 100644
index 0000000..6717bfd
--- /dev/null
+++ b/.config/i3/config
@@ -0,0 +1,230 @@
+# This file has been auto-generated by i3-config-wizard(1).
+# It will not be overwritten, so edit it as you like.
+#
+# Should you change your keyboard layout some time, delete
+# this file and re-run i3-config-wizard(1).
+#
+
+# i3 config file (v4)
+#
+# Please see https://i3wm.org/docs/userguide.html for a complete reference!
+
+set $mod Mod1
+
+# Font for window titles. Will also be used by the bar unless a different font
+# is used in the bar {} block below.
+font pango:DeJa Vu Sans Mono 10 
+
+# This font is widely installed, provides lots of unicode glyphs, right-to-left
+# text rendering and scalability on retina/hidpi displays (thanks to pango).
+#font pango:DejaVu Sans Mono 8
+
+# Before i3 v4.8, we used to recommend this one as the default:
+# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
+# The font above is very space-efficient, that is, it looks good, sharp and
+# clear in small sizes. However, its unicode glyph coverage is limited, the old
+# X core fonts rendering does not support right-to-left and this being a bitmap
+# font, it doesn’t scale on retina/hidpi displays.
+
+# Use Mouse+$mod to drag floating windows to their wanted position
+floating_modifier $mod
+
+# start a terminal
+bindsym $mod+Return exec termite
+
+# kill focused window
+bindsym $mod+Shift+q kill
+
+# start dmenu (a program launcher)
+#bindsym $mod+d exec dmenu_run
+# There also is the (new) i3-dmenu-desktop which only displays applications
+# shipping a .desktop file. It is a wrapper around dmenu, so you need that
+# installed.
+bindsym $mod+d exec --no-startup-id i3-dmenu-desktop --dmenu='rofi -dmenu -i'
+
+# change focus
+bindsym $mod+h focus left
+bindsym $mod+j focus down
+bindsym $mod+k focus up
+bindsym $mod+l focus right
+
+# alternatively, you can use the cursor keys:
+#bindsym $mod+Left focus left
+#bindsym $mod+Down focus down
+#bindsym $mod+Up focus up
+#bindsym $mod+Right focus right
+
+# move focused window
+bindsym $mod+Shift+h move left
+bindsym $mod+Shift+j move down
+bindsym $mod+Shift+k move up
+bindsym $mod+Shift+l move right
+
+# alternatively, you can use the cursor keys:
+#bindsym $mod+Shift+Left move left
+#bindsym $mod+Shift+Down move down
+#bindsym $mod+Shift+Up move up
+#bindsym $mod+Shift+Right move right
+
+# split in horizontal orientation
+#bindsym $mod+Shift+v split h
+
+# split in vertical orientation
+# bindsym $mod+v split v
+
+# toggle split
+bindsym $mod+v split toggle
+
+# enter fullscreen mode for the focused container
+bindsym $mod+f fullscreen toggle
+
+# change container layout (stacked, tabbed, toggle split)
+bindsym $mod+s layout stacking
+bindsym $mod+w layout tabbed
+bindsym $mod+e layout toggle split
+
+# toggle tiling / floating
+bindsym $mod+Shift+space floating toggle
+
+# change focus between tiling / floating windows
+bindsym $mod+space focus mode_toggle
+
+# focus the parent container
+bindsym $mod+a focus parent
+
+# focus the child container
+#bindsym $mod+d focus child
+
+# Define names for default workspaces for which we configure key bindings later on.
+# We use variables to avoid repeating the names in multiple places.
+set $ws1 "1"
+set $ws2 "2"
+set $ws3 "3"
+set $ws4 "4"
+set $ws5 "5"
+set $ws6 "6"
+set $ws7 "7"
+set $ws8 "8"
+set $ws9 "9"
+set $ws10 "10"
+
+# switch to workspace
+bindsym $mod+1 workspace $ws1
+bindsym $mod+2 workspace $ws2
+bindsym $mod+3 workspace $ws3
+bindsym $mod+4 workspace $ws4
+bindsym $mod+5 workspace $ws5
+bindsym $mod+6 workspace $ws6
+bindsym $mod+7 workspace $ws7
+bindsym $mod+8 workspace $ws8
+bindsym $mod+9 workspace $ws9
+bindsym $mod+0 workspace $ws10
+
+# move focused container to workspace
+bindsym $mod+Shift+1 move container to workspace $ws1
+bindsym $mod+Shift+2 move container to workspace $ws2
+bindsym $mod+Shift+3 move container to workspace $ws3
+bindsym $mod+Shift+4 move container to workspace $ws4
+bindsym $mod+Shift+5 move container to workspace $ws5
+bindsym $mod+Shift+6 move container to workspace $ws6
+bindsym $mod+Shift+7 move container to workspace $ws7
+bindsym $mod+Shift+8 move container to workspace $ws8
+bindsym $mod+Shift+9 move container to workspace $ws9
+bindsym $mod+Shift+0 move container to workspace $ws10
+
+# reload the configuration file
+bindsym $mod+Shift+c reload
+# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
+bindsym $mod+Shift+r restart
+# exit i3 (logs you out of your X session)
+bindsym $mod+Shift+e exec --no-startup-id  "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
+
+# resize window (you can also use the mouse for that)
+mode "resize" {
+        # These bindings trigger as soon as you enter the resize mode
+
+        # Pressing left will shrink the window’s width.
+        # Pressing right will grow the window’s width.
+        # Pressing up will shrink the window’s height.
+        # Pressing down will grow the window’s height.
+        bindsym j resize shrink width 10 px or 10 ppt
+        bindsym k resize grow height 10 px or 10 ppt
+        bindsym l resize shrink height 10 px or 10 ppt
+        bindsym semicolon resize grow width 10 px or 10 ppt
+
+        # same bindings, but for the arrow keys
+        bindsym Left resize shrink width 10 px or 10 ppt
+        bindsym Down resize grow height 10 px or 10 ppt
+        bindsym Up resize shrink height 10 px or 10 ppt
+        bindsym Right resize grow width 10 px or 10 ppt
+
+        # back to normal: Enter or Escape or $mod+r
+        bindsym Return mode "default"
+        bindsym Escape mode "default"
+        bindsym $mod+r mode "default"
+}
+
+bindsym $mod+r mode "resize"
+
+# colors
+# class                 border  bground text    indicator child_border
+client.focused          #000000 #125906 #FFFFFF #125906   #06770E
+client.focused_inactive #333333 #5F676A #FFFFFF #484E50   #5F676A
+client.unfocused        #333333 #222222 #888888 #292D2E   #222222
+client.urgent           #2F343A #41DD18 #FFFFFF #39F923   #25FF03
+client.placeholder      #000000 #0C0C0C #FFFFFF #000000   #0C0C0C
+
+client.background       #FFFFFF
+
+# Start i3bar to display a workspace bar (plus the system information i3status
+# finds out, if available)
+bar {
+        status_command i3blocks #i3status # | python ~/.config/i3status/wrapper.py
+	position top
+	font pango:DejaVuSansMono 13
+	colors {
+		background #292929
+		statusline #FFFFFF
+		separator  #666666
+
+		focused_workspace  #00FFFF #292929 #FFFFFF
+		active_workspace   #333333 #222222 #FFFFFF
+		inactive_workspace #666666 #292929 #888888
+		urgent_workspace   #2F343A #00FFFF #292929
+		binding_mode       #2F343A #2E9D11 #FFFFFF
+	}
+}
+
+# alt tabbing for workspaces
+bindsym Mod1+Tab workspace next
+bindsym Mod1+Shift+Tab workspace prev
+
+# win + l opens i3lock
+bindsym XF86PowerOff exec --no-startup-id  "i3lock -i /home/alec/Downloads/notabug2.png"
+
+# fix mouse pointer speed
+bindsym ctrl+Mod1+Tab exec --no-startup-id  "xinput set-prop 15 'libinput Accel Speed' '-0.75'"
+
+# jump to urgent window
+bindsym $mod+x [urgent=latest] focus  
+
+# brightness controls
+bindsym F5 exec --no-startup-id  "/home/alec/.config/i3/brightness.py -d 5 && pkill -SIGRTMIN+12 i3blocks && pause 1"
+bindsym F6 exec --no-startup-id  "/home/alec/.config/i3/brightness.py -i 5  && pkill -SIGRTMIN+12 i3blocks"
+
+# volume controls
+bindsym XF86AudioLowerVolume exec --no-startup-id  "amixer set Master 5%- unmute && pkill -SIGRTMIN+10 i3blocks"
+bindsym XF86AudioRaiseVolume exec --no-startup-id  "amixer set Master 5%+ unmute && pkill -SIGRTMIN+10 i3blocks"
+bindsym XF86AudioMute exec --no-startup-id  "amixer set Master toggle && pkill -SIGRTMIN+10 i3blocks"
+
+# key indicator trigger
+bindsym --release Caps_Lock exec --no-startup-id  pkill -SIGRTMIN+11 i3blocks
+bindsym --release Num_Lock exec --no-startup-id  pkill -SIGRTMIN+11 i3blocks
+
+
+# gaps stuff
+for_window [class="^.*"] border pixel 0
+smart_gaps on
+smart_borders on
+gaps outer -5
+gaps inner 15
diff --git a/.config/i3blocks/config b/.config/i3blocks/config
new file mode 100644
index 0000000..df0f967
--- /dev/null
+++ b/.config/i3blocks/config
@@ -0,0 +1,177 @@
+# i3blocks config file
+#
+# Please see man i3blocks for a complete reference!
+# The man page is also hosted at http://vivien.github.io/i3blocks
+#
+# List of valid properties:
+#
+# align
+# color
+# command
+# full_text
+# instance
+# interval
+# label
+# min_width
+# name
+# separator
+# separator_block_width
+# short_text
+# signal
+# urgent
+
+# Global properties
+#
+# The top properties below are applied to every block, but can be overridden.
+# Each block command defaults to the script name to avoid boilerplate.
+command=/usr/lib/i3blocks/$BLOCK_NAME
+separator_block_width=15
+markup=none
+
+
+[arch-update]
+command=~/.config/i3blocks/arch-update.py #run arch-update.py -h for options
+interval=3600
+markup=pango
+color=#006DA3
+
+# Memory usage
+#
+# The type defaults to "mem" if the instance is not specified.
+[memory]
+label=MEM
+separator=false
+interval=30
+
+#[memory]
+#label=SWAP
+#instance=swap
+#separator=false
+#interval=30
+
+# Disk usage
+#
+# The directory defaults to $HOME if the instance is not specified.
+# The script may be called with a optional argument to set the alert
+# (defaults to 10 for 10%).
+[disk]
+label=HOME
+#instance=/mnt/data
+interval=30
+
+# Network interface monitoring
+#
+# If the instance is not specified, use the interface used for default route.
+# The address can be forced to IPv4 or IPv6 with -4 or -6 switches.
+[iface]
+#instance=wlan0
+color=#00ffff
+interval=10
+separator=false
+
+[wifi]
+#instance=wlp3s0
+interval=10
+separator=false
+
+[bandwidth]
+#instance=eth0
+interval=5
+
+# CPU usage
+#
+# The script may be called with -w and -c switches to specify thresholds,
+# see the script for details.
+[cpu_usage]
+label=CPU
+interval=10
+#min_width=CPU: 100.00%
+separator=false
+
+#
+# Temperature
+#
+# Support multiple chips, though lm-sensors.
+# The script may be called with -w and -c switches to specify thresholds,
+# see the script for details.
+[temperature]
+label=TEMP
+interval=10
+command=/usr/lib/i3blocks/temperature --chip coretemp-isa-0000
+
+
+#[load_average]
+#interval=10
+
+# Battery indicator
+#
+# The battery instance defaults to 0.
+[battery]
+#label=BAT
+label= BAT
+#🔋
+#⚡
+#instance=1
+interval=30
+separator=false
+
+[brightness]
+command=~/.config/i3blocks/brightness.py
+label=BRI
+#☀️
+interval=once
+signal=12
+
+# Key indicators
+#
+# Add the following bindings to i3 config file:
+#
+# bindsym --release Caps_Lock exec pkill -SIGRTMIN+11 i3blocks
+# bindsym --release Num_Lock  exec pkill -SIGRTMIN+11 i3blocks
+#[keyindicator]
+#instance=CAPS
+#interval=once
+#signal=11
+#
+#[keyindicator]
+#instance=NUM
+#interval=once
+#signal=11
+
+# Volume indicator
+#
+# The first parameter sets the step (and units to display)
+# The second parameter overrides the mixer selection
+# See the script for details.
+
+[volume]
+#label=VOL
+label=♪
+instance=Master
+#instance=PCM
+interval=once
+signal=10
+
+
+# Date Time
+#
+[time]
+command=date '+%a %Y-%m-%d %H:%M:%S'
+interval=1
+
+# Generic media player support
+#
+# This displays "ARTIST - SONG" if a music is playing.
+# Supported players are: spotify, vlc, audacious, xmms2, mplayer, and others.
+#[mediaplayer]
+#instance=spotify
+#interval=5
+#signal=10
+
+# OpenVPN support
+#
+# Support multiple VPN, with colors.
+#[openvpn]
+#interval=20
+
+
diff --git a/.config/neofetch/config.conf b/.config/neofetch/config.conf
new file mode 100644
index 0000000..10430cc
--- /dev/null
+++ b/.config/neofetch/config.conf
@@ -0,0 +1,728 @@
+# See this wiki page for more info:
+# https://github.com/dylanaraps/neofetch/wiki/Customizing-Info
+print_info() {
+    info title
+    info underline
+
+    info "OS" distro
+    info "Host" model
+    info "Kernel" kernel
+    info "Uptime" uptime
+    info "Packages" packages
+    info "Shell" shell
+    info "Resolution" resolution
+    # info "DE" de
+    info "WM" wm
+    #info "WM Theme" wm_theme
+    #info "Theme" theme
+    #info "Icons" icons
+    prin "$(color 4)Editor: $(echo $EDITOR)"
+    info "Terminal" term
+    info "Terminal Font" term_font
+    info "CPU" cpu
+    info "GPU" gpu
+    info "Memory" memory
+
+    # info "GPU Driver" gpu_driver  # Linux/macOS only
+    # info "CPU Usage" cpu_usage
+    info "Disk" disk
+    # info "Battery" battery
+    # info "Font" font
+    # info "Song" song
+    # info "Local IP" local_ip
+    # info "Public IP" public_ip
+    # info "Users" users
+    # info "Locale" locale  # This only works on glibc systems.
+
+    info line_break
+    info cols
+    #info line_break
+}
+
+
+# Kernel
+
+
+# Shorten the output of the kernel function.
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --kernel_shorthand
+# Supports: Everything except *BSDs (except PacBSD and PC-BSD)
+#
+# Example:
+# on:  '4.8.9-1-ARCH'
+# off: 'Linux 4.8.9-1-ARCH'
+kernel_shorthand="on"
+
+
+# Distro
+
+
+# Shorten the output of the distro function
+#
+# Default:  'off'
+# Values:   'on', 'off', 'tiny'
+# Flag:     --distro_shorthand
+# Supports: Everything except Windows and Haiku
+distro_shorthand="off"
+
+# Show/Hide OS Architecture.
+# Show 'x86_64', 'x86' and etc in 'Distro:' output.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --os_arch
+#
+# Example:
+# on:  'Arch Linux x86_64'
+# off: 'Arch Linux'
+os_arch="on"
+
+
+# Uptime
+
+
+# Shorten the output of the uptime function
+#
+# Default: 'on'
+# Values:  'on', 'off', 'tiny'
+# Flag:    --uptime_shorthand
+#
+# Example:
+# on:   '2 days, 10 hours, 3 mins'
+# off:  '2 days, 10 hours, 3 minutes'
+# tiny: '2d 10h 3m'
+uptime_shorthand="on"
+
+
+# Packages
+
+
+# Show/Hide Package Manager names.
+#
+# Default: 'tiny'
+# Values:  'on', 'tiny' 'off'
+# Flag:    --package_managers
+#
+# Example:
+# on:   '998 (pacman), 8 (flatpak), 4 (snap)'
+# tiny: '908 (pacman, flatpak, snap)'
+# off:  '908'
+package_managers="on"
+
+
+# Shell
+
+
+# Show the path to $SHELL
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --shell_path
+#
+# Example:
+# on:  '/bin/bash'
+# off: 'bash'
+shell_path="off"
+
+# Show $SHELL version
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --shell_version
+#
+# Example:
+# on:  'bash 4.4.5'
+# off: 'bash'
+shell_version="on"
+
+
+# CPU
+
+
+# CPU speed type
+#
+# Default: 'bios_limit'
+# Values: 'scaling_cur_freq', 'scaling_min_freq', 'scaling_max_freq', 'bios_limit'.
+# Flag:    --speed_type
+# Supports: Linux with 'cpufreq'
+# NOTE: Any file in '/sys/devices/system/cpu/cpu0/cpufreq' can be used as a value.
+speed_type="bios_limit"
+
+# CPU speed shorthand
+#
+# Default: 'off'
+# Values: 'on', 'off'.
+# Flag:    --speed_shorthand.
+# NOTE: This flag is not supported in systems with CPU speed less than 1 GHz
+#
+# Example:
+# on:    'i7-6500U (4) @ 3.1GHz'
+# off:   'i7-6500U (4) @ 3.100GHz'
+speed_shorthand="off"
+
+# Enable/Disable CPU brand in output.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --cpu_brand
+#
+# Example:
+# on:   'Intel i7-6500U'
+# off:  'i7-6500U (4)'
+cpu_brand="on"
+
+# CPU Speed
+# Hide/Show CPU speed.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --cpu_speed
+#
+# Example:
+# on:  'Intel i7-6500U (4) @ 3.1GHz'
+# off: 'Intel i7-6500U (4)'
+cpu_speed="on"
+
+# CPU Cores
+# Display CPU cores in output
+#
+# Default: 'logical'
+# Values:  'logical', 'physical', 'off'
+# Flag:    --cpu_cores
+# Support: 'physical' doesn't work on BSD.
+#
+# Example:
+# logical:  'Intel i7-6500U (4) @ 3.1GHz' (All virtual cores)
+# physical: 'Intel i7-6500U (2) @ 3.1GHz' (All physical cores)
+# off:      'Intel i7-6500U @ 3.1GHz'
+cpu_cores="logical"
+
+# CPU Temperature
+# Hide/Show CPU temperature.
+# Note the temperature is added to the regular CPU function.
+#
+# Default: 'off'
+# Values:  'C', 'F', 'off'
+# Flag:    --cpu_temp
+# Supports: Linux, BSD
+# NOTE: For FreeBSD and NetBSD-based systems, you'll need to enable
+#       coretemp kernel module. This only supports newer Intel processors.
+#
+# Example:
+# C:   'Intel i7-6500U (4) @ 3.1GHz [27.2°C]'
+# F:   'Intel i7-6500U (4) @ 3.1GHz [82.0°F]'
+# off: 'Intel i7-6500U (4) @ 3.1GHz'
+cpu_temp="on"
+
+
+# GPU
+
+
+# Enable/Disable GPU Brand
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --gpu_brand
+#
+# Example:
+# on:  'AMD HD 7950'
+# off: 'HD 7950'
+gpu_brand="on"
+
+# Which GPU to display
+#
+# Default: 'all'
+# Values:  'all', 'dedicated', 'integrated'
+# Flag:    --gpu_type
+# Supports: Linux
+#
+# Example:
+# all:
+#   GPU1: AMD HD 7950
+#   GPU2: Intel Integrated Graphics
+#
+# dedicated:
+#   GPU1: AMD HD 7950
+#
+# integrated:
+#   GPU1: Intel Integrated Graphics
+gpu_type="all"
+
+
+# Resolution
+
+
+# Display refresh rate next to each monitor
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --refresh_rate
+# Supports: Doesn't work on Windows.
+#
+# Example:
+# on:  '1920x1080 @ 60Hz'
+# off: '1920x1080'
+refresh_rate="off"
+
+
+# Gtk Theme / Icons / Font
+
+
+# Shorten output of GTK Theme / Icons / Font
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --gtk_shorthand
+#
+# Example:
+# on:  'Numix, Adwaita'
+# off: 'Numix [GTK2], Adwaita [GTK3]'
+gtk_shorthand="off"
+
+
+# Enable/Disable gtk2 Theme / Icons / Font
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --gtk2
+#
+# Example:
+# on:  'Numix [GTK2], Adwaita [GTK3]'
+# off: 'Adwaita [GTK3]'
+gtk2="on"
+
+# Enable/Disable gtk3 Theme / Icons / Font
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --gtk3
+#
+# Example:
+# on:  'Numix [GTK2], Adwaita [GTK3]'
+# off: 'Numix [GTK2]'
+gtk3="on"
+
+
+# IP Address
+
+
+# Website to ping for the public IP
+#
+# Default: 'http://ident.me'
+# Values:  'url'
+# Flag:    --ip_host
+public_ip_host="http://ident.me"
+
+
+
+# Disk
+
+
+# Which disks to display.
+# The values can be any /dev/sdXX, mount point or directory.
+# NOTE: By default we only show the disk info for '/'.
+#
+# Default: '/'
+# Values:  '/', '/dev/sdXX', '/path/to/drive'.
+# Flag:    --disk_show
+#
+# Example:
+# disk_show=('/' '/dev/sdb1'):
+#      'Disk (/): 74G / 118G (66%)'
+#      'Disk (/mnt/Videos): 823G / 893G (93%)'
+#
+# disk_show=('/'):
+#      'Disk (/): 74G / 118G (66%)'
+#
+disk_show=('/')
+
+# Disk subtitle.
+# What to append to the Disk subtitle.
+#
+# Default: 'mount'
+# Values:  'mount', 'name', 'dir'
+# Flag:    --disk_subtitle
+#
+# Example:
+# name:   'Disk (/dev/sda1): 74G / 118G (66%)'
+#         'Disk (/dev/sdb2): 74G / 118G (66%)'
+#
+# mount:  'Disk (/): 74G / 118G (66%)'
+#         'Disk (/mnt/Local Disk): 74G / 118G (66%)'
+#         'Disk (/mnt/Videos): 74G / 118G (66%)'
+#
+# dir:    'Disk (/): 74G / 118G (66%)'
+#         'Disk (Local Disk): 74G / 118G (66%)'
+#         'Disk (Videos): 74G / 118G (66%)'
+disk_subtitle="mount"
+
+
+# Song
+
+
+# Manually specify a music player.
+#
+# Default: 'auto'
+# Values:  'auto', 'player-name'
+# Flag:    --music_player
+#
+# Available values for 'player-name':
+#
+# amarok
+# audacious
+# banshee
+# bluemindo
+# clementine
+# cmus
+# deadbeef
+# deepin-music
+# dragon
+# elisa
+# exaile
+# gnome-music
+# gmusicbrowser
+# Google Play
+# guayadeque
+# iTunes
+# juk
+# lollypop
+# mocp
+# mopidy
+# mpd
+# pogo
+# pragha
+# qmmp
+# quodlibet
+# rhythmbox
+# sayonara
+# smplayer
+# spotify
+# Spotify
+# tomahawk
+# vlc
+# xmms2d
+# yarock
+music_player="auto"
+
+# Format to display song information.
+#
+# Default: '%artist% - %album% - %title%'
+# Values:  '%artist%', '%album%', '%title%'
+# Flag:    --song_format
+#
+# Example:
+# default: 'Song: Jet - Get Born - Sgt Major'
+song_format="%artist% - %album% - %title%"
+
+# Print the Artist, Album and Title on separate lines
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --song_shorthand
+#
+# Example:
+# on:  'Artist: The Fratellis'
+#      'Album: Costello Music'
+#      'Song: Chelsea Dagger'
+#
+# off: 'Song: The Fratellis - Costello Music - Chelsea Dagger'
+song_shorthand="off"
+
+# 'mpc' arguments (specify a host, password etc).
+#
+# Default:  ''
+# Example: mpc_args=(-h HOST -P PASSWORD)
+mpc_args=()
+
+
+# Text Colors
+
+
+# Text Colors
+#
+# Default:  'distro'
+# Values:   'distro', 'num' 'num' 'num' 'num' 'num' 'num'
+# Flag:     --colors
+#
+# Each number represents a different part of the text in
+# this order: 'title', '@', 'underline', 'subtitle', 'colon', 'info'
+#
+# Example:
+# colors=(distro)      - Text is colored based on Distro colors.
+# colors=(4 6 1 8 8 6) - Text is colored in the order above.
+colors=(4 7 7 4 4 7)
+
+
+# Text Options
+
+
+# Toggle bold text
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --bold
+bold="on"
+
+# Enable/Disable Underline
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --underline
+underline_enabled="on"
+
+# Underline character
+#
+# Default:  '-'
+# Values:   'string'
+# Flag:     --underline_char
+underline_char="-"
+
+
+# Color Blocks
+
+
+# Color block range
+# The range of colors to print.
+#
+# Default:  '0', '7'
+# Values:   'num'
+# Flag:     --block_range
+#
+# Example:
+#
+# Display colors 0-7 in the blocks.  (8 colors)
+# neofetch --block_range 0 7
+#
+# Display colors 0-15 in the blocks. (16 colors)
+# neofetch --block_range 0 15
+
+# Toggle color blocks
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --color_blocks
+color_blocks="on"
+
+# Color block width in spaces
+#
+# Default:  '3'
+# Values:   'num'
+# Flag:     --block_width
+block_width=3
+
+# Color block height in lines
+#
+# Default:  '1'
+# Values:   'num'
+# Flag:     --block_height
+block_height=1
+
+
+# Progress Bars
+
+
+# Bar characters
+#
+# Default:  '-', '='
+# Values:   'string', 'string'
+# Flag:     --bar_char
+#
+# Example:
+# neofetch --bar_char 'elapsed' 'total'
+# neofetch --bar_char '-' '='
+bar_char_elapsed="-"
+bar_char_total="="
+
+# Toggle Bar border
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --bar_border
+bar_border="on"
+
+# Progress bar length in spaces
+# Number of chars long to make the progress bars.
+#
+# Default:  '15'
+# Values:   'num'
+# Flag:     --bar_length
+bar_length=15
+
+# Progress bar colors
+# When set to distro, uses your distro's logo colors.
+#
+# Default:  'distro', 'distro'
+# Values:   'distro', 'num'
+# Flag:     --bar_colors
+#
+# Example:
+# neofetch --bar_colors 3 4
+# neofetch --bar_colors distro 5
+bar_color_elapsed="distro"
+bar_color_total="distro"
+
+
+# Info display
+# Display a bar with the info.
+#
+# Default: 'off'
+# Values:  'bar', 'infobar', 'barinfo', 'off'
+# Flags:   --cpu_display
+#          --memory_display
+#          --battery_display
+#          --disk_display
+#
+# Example:
+# bar:     '[---=======]'
+# infobar: 'info [---=======]'
+# barinfo: '[---=======] info'
+# off:     'info'
+cpu_display="off"
+memory_display="off"
+battery_display="off"
+disk_display="off"
+
+
+# Backend Settings
+
+
+# Image backend.
+#
+# Default:  'ascii'
+# Values:   'ascii', 'caca', 'jp2a', 'iterm2', 'off', 'termpix', 'pixterm', 'tycat', 'w3m'
+# Flag:     --backend
+image_backend="ascii"
+
+# Image Source
+#
+# Which image or ascii file to display.
+#
+# Default:  'auto'
+# Values:   'auto', 'ascii', 'wallpaper', '/path/to/img', '/path/to/ascii', '/path/to/dir/'
+# Flag:     --source
+#
+# NOTE: 'auto' will pick the best image source for whatever image backend is used.
+#       In ascii mode, distro ascii art will be used and in an image mode, your
+#       wallpaper will be used.
+image_source="auto"
+
+
+# Ascii Options
+
+
+# Ascii distro
+# Which distro's ascii art to display.
+#
+# Default: 'auto'
+# Values:  'auto', 'distro_name'
+# Flag:    --ascii_distro
+#
+# NOTE: Arch and Ubuntu have 'old' logo variants.
+#       Change this to 'arch_old' or 'ubuntu_old' to use the old logos.
+# NOTE: Ubuntu has flavor variants.
+#       Change this to 'Lubuntu', 'Xubuntu', 'Ubuntu-GNOME' or 'Ubuntu-Budgie' to use the flavors.
+# NOTE: Arch, Crux and Gentoo have a smaller logo variant.
+#       Change this to 'arch_small', 'crux_small' or 'gentoo_small' to use the small logos.
+ascii_distro="auto"
+
+# Ascii Colors
+#
+# Default:  'distro'
+# Values:   'distro', 'num' 'num' 'num' 'num' 'num' 'num'
+# Flag:     --ascii_colors
+#
+# Example:
+# ascii_colors=(distro)      - Ascii is colored based on Distro colors.
+# ascii_colors=(4 6 1 8 8 6) - Ascii is colored using these colors.
+ascii_colors=(4 12 1 8 8 12)
+
+# Bold ascii logo
+# Whether or not to bold the ascii logo.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --ascii_bold
+ascii_bold="off"
+
+
+# Image Options
+
+
+# Image loop
+# Setting this to on will make neofetch redraw the image constantly until
+# Ctrl+C is pressed. This fixes display issues in some terminal emulators.
+#
+# Default:  'off'
+# Values:   'on', 'off'
+# Flag:     --loop
+image_loop="off"
+
+# Thumbnail directory
+#
+# Default: '~/.cache/thumbnails/neofetch'
+# Values:  'dir'
+thumbnail_dir="${XDG_CACHE_HOME:-${HOME}/.cache}/thumbnails/neofetch"
+
+# Crop mode
+#
+# Default:  'normal'
+# Values:   'normal', 'fit', 'fill'
+# Flag:     --crop_mode
+#
+# See this wiki page to learn about the fit and fill options.
+# https://github.com/dylanaraps/neofetch/wiki/What-is-Waifu-Crop%3F
+crop_mode="normal"
+
+# Crop offset
+# Note: Only affects 'normal' crop mode.
+#
+# Default:  'center'
+# Values:   'northwest', 'north', 'northeast', 'west', 'center'
+#           'east', 'southwest', 'south', 'southeast'
+# Flag:     --crop_offset
+crop_offset="center"
+
+# Image size
+# The image is half the terminal width by default.
+#
+# Default: 'auto'
+# Values:  'auto', '00px', '00%', 'none'
+# Flags:   --image_size
+#          --size
+image_size="auto"
+
+# Gap between image and text
+#
+# Default: '3'
+# Values:  'num', '-num'
+# Flag:    --gap
+gap=3
+
+# Image offsets
+# Only works with the w3m backend.
+#
+# Default: '0'
+# Values:  'px'
+# Flags:   --xoffset
+#          --yoffset
+yoffset=0
+xoffset=0
+
+# Image background color
+# Only works with the w3m backend.
+#
+# Default: ''
+# Values:  'color', 'blue'
+# Flag:    --bg_color
+background_color=
+
+
+# Misc Options
+
+# Stdout mode
+# Turn off all colors and disables image backend (ASCII/Image).
+# Useful for piping into another command.
+# Default: 'off'
+# Values: 'on', 'off'
+stdout="off"
diff --git a/.config/rofi/config b/.config/rofi/config
new file mode 100644
index 0000000..3fafbd1
--- /dev/null
+++ b/.config/rofi/config
@@ -0,0 +1 @@
+rofi.theme: sidetabCyan.rasi 
diff --git a/.config/rofi/sidetab.rasi b/.config/rofi/sidetab.rasi
new file mode 100644
index 0000000..c465e26
--- /dev/null
+++ b/.config/rofi/sidetab.rasi
@@ -0,0 +1,131 @@
+/**
+ * User: deadguy
+ * Copyright: deadguy
+ */
+
+configuration {
+	display-drun:    "Activate";
+	display-run:     "Execute";
+	display-window:  "Window";
+	show-icons:      true;
+	sidebar-mode:    true;
+}
+
+* {
+	background-color:            #080808;
+	text-color:                  #d3d7cf;
+	selbg:                       #215d9c;
+	actbg:                       #262626;
+	urgbg:                       #e53935;
+	winbg:			     #26c6da;
+
+	selected-normal-foreground:  @winbg;
+	normal-foreground:           @text-color;
+	selected-normal-background:  @actbg;
+	normal-background:           @background-color;
+
+	selected-urgent-foreground:  @background-color;
+	urgent-foreground:           @text-color;
+	selected-urgent-background:  @urgbg;
+	urgent-background:           @background-color;
+
+	selected-active-foreground:  @winbg;
+	active-foreground:           @text-color;
+	selected-active-background:  @actbg;
+	active-background:           @selbg;
+
+	line-margin:                 2;
+	line-padding:                2;
+	separator-style:             "none";
+	hide-scrollbar:              "true";
+	margin:                      0;
+	padding:                     0;
+}
+
+window {
+	location:	 west;
+	anchor:		 west;
+	height:		 100%;
+	width:		 22%;
+	orientation: horizontal;
+	children:	 [mainbox];
+}
+
+mainbox {
+	spacing:  0.8em;
+	children: [ entry,listview,sidebar ];
+}
+
+button { padding: 5px 2px; }
+
+button selected {
+	background-color: @active-background;
+	text-color:       @background-color;
+}
+
+inputbar {
+	padding: 5px;
+	spacing: 5px;
+}
+
+listview {
+	spacing: 0.5em;
+	dynamic: false;
+	cycle:   true;
+}
+
+element { padding: 10px; }
+
+entry {
+	expand:         false;
+	text-color:     @normal-foreground;
+	vertical-align: 1;
+	padding:        5px;
+}
+
+element normal.normal {
+	background-color: @normal-background;
+	text-color:       @normal-foreground;
+}
+
+element normal.urgent {
+	background-color: @urgent-background;
+	text-color:       @urgent-foreground;
+}
+
+element normal.active {
+	background-color: @active-background;
+	text-color:       @active-foreground;
+}
+
+element selected.normal {
+	background-color: @selected-normal-background;
+	text-color:       @selected-normal-foreground;
+	border:           0 5px solid 0 0;
+	border-color:	    @active-background;
+}
+
+element selected.urgent {
+	background-color: @selected-urgent-background;
+	text-color:       @selected-urgent-foreground;
+}
+
+element selected.active {
+	background-color: @selected-active-background;
+	text-color:       @selected-active-foreground;
+}
+
+element alternate.normal {
+	background-color: @normal-background;
+	text-color:       @normal-foreground;
+}
+
+element alternate.urgent {
+	background-color: @urgent-background;
+	text-color:       @urgent-foreground;
+}
+
+element alternate.active {
+	background-color: @active-background;
+	text-color:       @active-foreground;
+}
diff --git a/.config/rofi/sidetabArch.rasi b/.config/rofi/sidetabArch.rasi
new file mode 100644
index 0000000..d07c241
--- /dev/null
+++ b/.config/rofi/sidetabArch.rasi
@@ -0,0 +1,131 @@
+/**
+ * User: deadguy
+ * Copyright: deadguy
+ */
+
+configuration {
+	display-drun:    "Activate";
+	display-run:     "Execute";
+	display-window:  "Window";
+	show-icons:      true;
+	sidebar-mode:    true;
+}
+
+* {
+	background-color:            #292929;
+	text-color:                  #d3d7cf;
+	selbg:                       #006DA3;
+	actbg:                       #262626;
+	urgbg:                       #e53935;
+	winbg:			     #1793D1;
+
+	selected-normal-foreground:  @winbg;
+	normal-foreground:           @text-color;
+	selected-normal-background:  @actbg;
+	normal-background:           @background-color;
+
+	selected-urgent-foreground:  @background-color;
+	urgent-foreground:           @text-color;
+	selected-urgent-background:  @urgbg;
+	urgent-background:           @background-color;
+
+	selected-active-foreground:  @winbg;
+	active-foreground:           @text-color;
+	selected-active-background:  @actbg;
+	active-background:           @selbg;
+
+	line-margin:                 2;
+	line-padding:                2;
+	separator-style:             "none";
+	hide-scrollbar:              "true";
+	margin:                      0;
+	padding:                     0;
+}
+
+window {
+	location:	 west;
+	anchor:		 west;
+	height:		 100%;
+	width:		 22%;
+	orientation: horizontal;
+	children:	 [mainbox];
+}
+
+mainbox {
+	spacing:  0.8em;
+	children: [ entry,listview,sidebar ];
+}
+
+button { padding: 5px 2px; }
+
+button selected {
+	background-color: @active-background;
+	text-color:       @background-color;
+}
+
+inputbar {
+	padding: 5px;
+	spacing: 5px;
+}
+
+listview {
+	spacing: 0.5em;
+	dynamic: false;
+	cycle:   true;
+}
+
+element { padding: 10px; }
+
+entry {
+	expand:         false;
+	text-color:     @normal-foreground;
+	vertical-align: 1;
+	padding:        5px;
+}
+
+element normal.normal {
+	background-color: @normal-background;
+	text-color:       @normal-foreground;
+}
+
+element normal.urgent {
+	background-color: @urgent-background;
+	text-color:       @urgent-foreground;
+}
+
+element normal.active {
+	background-color: @active-background;
+	text-color:       @active-foreground;
+}
+
+element selected.normal {
+	background-color: @selected-normal-background;
+	text-color:       @selected-normal-foreground;
+	border:           0 5px solid 0 0;
+	border-color:	    @active-background;
+}
+
+element selected.urgent {
+	background-color: @selected-urgent-background;
+	text-color:       @selected-urgent-foreground;
+}
+
+element selected.active {
+	background-color: @selected-active-background;
+	text-color:       @selected-active-foreground;
+}
+
+element alternate.normal {
+	background-color: @normal-background;
+	text-color:       @normal-foreground;
+}
+
+element alternate.urgent {
+	background-color: @urgent-background;
+	text-color:       @urgent-foreground;
+}
+
+element alternate.active {
+	background-color: @active-background;
+	text-color:       @active-foreground;
+}
diff --git a/.config/rofi/sidetabCyan.rasi b/.config/rofi/sidetabCyan.rasi
new file mode 100644
index 0000000..6b65d1a
--- /dev/null
+++ b/.config/rofi/sidetabCyan.rasi
@@ -0,0 +1,131 @@
+/**
+ * User: deadguy
+ * Copyright: deadguy
+ */
+
+configuration {
+	display-drun:    "Activate";
+	display-run:     "Execute";
+	display-window:  "Window";
+	show-icons:      true;
+	sidebar-mode:    true;
+}
+
+* {
+	background-color:            #292929;
+	text-color:                  #d3d7cf;
+	selbg:                       #00FFFF;
+	actbg:                       #262626;
+	urgbg:                       #e53935;
+	winbg:			     #00FFFF;
+
+	selected-normal-foreground:  @winbg;
+	normal-foreground:           @text-color;
+	selected-normal-background:  @actbg;
+	normal-background:           @background-color;
+
+	selected-urgent-foreground:  @background-color;
+	urgent-foreground:           @text-color;
+	selected-urgent-background:  @urgbg;
+	urgent-background:           @background-color;
+
+	selected-active-foreground:  @winbg;
+	active-foreground:           @text-color;
+	selected-active-background:  @actbg;
+	active-background:           @selbg;
+
+	line-margin:                 2;
+	line-padding:                2;
+	separator-style:             "none";
+	hide-scrollbar:              "true";
+	margin:                      0;
+	padding:                     0;
+}
+
+window {
+	location:	 west;
+	anchor:		 west;
+	height:		 100%;
+	width:		 22%;
+	orientation: horizontal;
+	children:	 [mainbox];
+}
+
+mainbox {
+	spacing:  0.8em;
+	children: [ entry,listview,sidebar ];
+}
+
+button { padding: 5px 2px; }
+
+button selected {
+	background-color: @active-background;
+	text-color:       @background-color;
+}
+
+inputbar {
+	padding: 5px;
+	spacing: 5px;
+}
+
+listview {
+	spacing: 0.5em;
+	dynamic: false;
+	cycle:   true;
+}
+
+element { padding: 10px; }
+
+entry {
+	expand:         false;
+	text-color:     @normal-foreground;
+	vertical-align: 1;
+	padding:        5px;
+}
+
+element normal.normal {
+	background-color: @normal-background;
+	text-color:       @normal-foreground;
+}
+
+element normal.urgent {
+	background-color: @urgent-background;
+	text-color:       @urgent-foreground;
+}
+
+element normal.active {
+	background-color: @active-background;
+	text-color:       @active-foreground;
+}
+
+element selected.normal {
+	background-color: @selected-normal-background;
+	text-color:       @selected-normal-foreground;
+	border:           0 5px solid 0 0;
+	border-color:	    @active-background;
+}
+
+element selected.urgent {
+	background-color: @selected-urgent-background;
+	text-color:       @selected-urgent-foreground;
+}
+
+element selected.active {
+	background-color: @selected-active-background;
+	text-color:       @selected-active-foreground;
+}
+
+element alternate.normal {
+	background-color: @normal-background;
+	text-color:       @normal-foreground;
+}
+
+element alternate.urgent {
+	background-color: @urgent-background;
+	text-color:       @urgent-foreground;
+}
+
+element alternate.active {
+	background-color: @active-background;
+	text-color:       @active-foreground;
+}
diff --git a/.config/rofi/sidetabGreen.rasi b/.config/rofi/sidetabGreen.rasi
new file mode 100644
index 0000000..875158e
--- /dev/null
+++ b/.config/rofi/sidetabGreen.rasi
@@ -0,0 +1,131 @@
+/**
+ * User: deadguy
+ * Copyright: deadguy
+ */
+
+configuration {
+	display-drun:    "Activate";
+	display-run:     "Execute";
+	display-window:  "Window";
+	show-icons:      true;
+	sidebar-mode:    true;
+}
+
+* {
+	background-color:            #080808;
+	text-color:                  #d3d7cf;
+	selbg:                       #02f432;
+	actbg:                       #262626;
+	urgbg:                       #e53935;
+	winbg:					     #02f432;
+
+	selected-normal-foreground:  @winbg;
+	normal-foreground:           @text-color;
+	selected-normal-background:  @actbg;
+	normal-background:           @background-color;
+
+	selected-urgent-foreground:  @background-color;
+	urgent-foreground:           @text-color;
+	selected-urgent-background:  @urgbg;
+	urgent-background:           @background-color;
+
+	selected-active-foreground:  @winbg;
+	active-foreground:           @text-color;
+	selected-active-background:  @actbg;
+	active-background:           @selbg;
+
+	line-margin:                 2;
+	line-padding:                2;
+	separator-style:             "none";
+	hide-scrollbar:              "true";
+	margin:                      0;
+	padding:                     0;
+}
+
+window {
+	location:	 west;
+	anchor:		 west;
+	height:		 100%;
+	width:		 22%;
+	orientation: horizontal;
+	children:	 [mainbox];
+}
+
+mainbox {
+	spacing:  0.8em;
+	children: [ entry,listview,sidebar ];
+}
+
+button { padding: 5px 2px; }
+
+button selected {
+	background-color: @active-background;
+	text-color:       @background-color;
+}
+
+inputbar {
+	padding: 5px;
+	spacing: 5px;
+}
+
+listview {
+	spacing: 0.5em;
+	dynamic: false;
+	cycle:   true;
+}
+
+element { padding: 10px; }
+
+entry {
+	expand:         false;
+	text-color:     @normal-foreground;
+	vertical-align: 1;
+	padding:        5px;
+}
+
+element normal.normal {
+	background-color: @normal-background;
+	text-color:       @normal-foreground;
+}
+
+element normal.urgent {
+	background-color: @urgent-background;
+	text-color:       @urgent-foreground;
+}
+
+element normal.active {
+	background-color: @active-background;
+	text-color:       @active-foreground;
+}
+
+element selected.normal {
+	background-color: @selected-normal-background;
+	text-color:       @selected-normal-foreground;
+	border:           0 5px solid 0 0;
+	border-color:	    @active-background;
+}
+
+element selected.urgent {
+	background-color: @selected-urgent-background;
+	text-color:       @selected-urgent-foreground;
+}
+
+element selected.active {
+	background-color: @selected-active-background;
+	text-color:       @selected-active-foreground;
+}
+
+element alternate.normal {
+	background-color: @normal-background;
+	text-color:       @normal-foreground;
+}
+
+element alternate.urgent {
+	background-color: @urgent-background;
+	text-color:       @urgent-foreground;
+}
+
+element alternate.active {
+	background-color: @active-background;
+	text-color:       @active-foreground;
+}
diff --git a/.config/termite/config b/.config/termite/config
new file mode 100644
index 0000000..a05d048
--- /dev/null
+++ b/.config/termite/config
@@ -0,0 +1,127 @@
+[options]
+#allow_bold = true
+#audible_bell = false
+clickable_url = true
+#dynamic_title = true
+font = DejaVu Sans Mono 12
+#fullscreen = true
+#geometry = 640x480
+#icon_name = terminal
+#mouse_autohide = false
+#scroll_on_output = false
+#scroll_on_keystroke = true
+# Length of the scrollback buffer, 0 disabled the scrollback buffer
+# and setting it to a negative value means "infinite scrollback"
+scrollback_lines = 10000
+#search_wrap = true
+#urgent_on_bell = true
+#hyperlinks = false
+
+# $BROWSER is used by default if set, with xdg-open as a fallback
+#browser = xdg-open
+
+# "system", "on" or "off"
+#cursor_blink = system
+
+# "block", "underline" or "ibeam"
+#cursor_shape = block
+
+# Hide links that are no longer valid in url select overlay mode
+#filter_unmatched_urls = true
+
+# Emit escape sequences for extra modified keys
+#modify_other_keys = false
+
+# set size hints for the window
+#size_hints = false
+
+# "off", "left" or "right"
+#scrollbar = off
+
+[colors]
+# If both of these are unset, cursor falls back to the foreground color,
+# and cursor_foreground falls back to the background color.
+#cursor = #dcdccc
+#cursor_foreground = #dcdccc
+
+#foreground = #dcdccc
+#foreground_bold = #ffffff
+#background = #3f3f3f
+
+# 20% background transparency (requires a compositor)
+background = rgba(41, 41, 41, .9)
+
+# If unset, will reverse foreground and background
+highlight = #2f2f2f
+
+# Colors from color0 to color254 can be set
+#color0 = #3f3f3f
+#color1 = #705050
+#color2 = #60b48a
+#color3 = #dfaf8f
+#color4 = #506070
+#color5 = #dc8cc3
+#color6 = #8cd0d3
+#color7 = #dcdccc
+#color8 = #709080
+#color9 = #dca3a3
+#color10 = #c3bf9f
+#color11 = #f0dfaf
+#color12 = #94bff3
+#color13 = #ec93d3
+#color14 = #93e0e3
+#color15 = #ffffff
+
+[colors]
+
+# special
+foreground      = #f1ebeb
+foreground_bold = #f1ebeb
+cursor          = #f1ebeb
+#background      = #272822
+
+# black
+color0  = #48483e
+color8  = #76715e
+
+# red
+color1  = #dc2566
+color9  = #fa2772
+
+# green
+color2  = #8fc029
+color10 = #a7e22e
+
+# yellow
+color3  = #d4c96e
+color11 = #e7db75
+
+# blue
+color4  = #55bcce
+color12 = #66d9ee
+
+# magenta
+color5  = #9358fe
+color13 = #ae82ff
+
+# cyan
+color6  = #56b7a5
+color14 = #66efd5
+
+# white
+color7  = #acada1
+color15 = #cfd0c2
+
+
+[hints]
+#font = Monospace 12
+#foreground = #dcdccc
+#background = #3f3f3f
+#active_foreground = #e68080
+#active_background = #3f3f3f
+#padding = 2
+#border = #3f3f3f
+#border_width = 0.5
+#roundness = 2.0
+
+# vim: ft=dosini cms=#%s